FuelTech EFI Systems

FuelTech FT400 EFI SYSTEM

FuelTech


Regular price $1,199.00
FuelTech FT400 EFI SYSTEM
FEATURES
Not recommended for high performance V8 applications.
Please refer to our FT500LITE, FT500, FT550, and FT600 ECU for this type of application.

4.3” color touchscreen TFT – non reflective
Electronic throttle control (Drive-by-wire)
Distributor type and crank trigger ignition control
6 ignition outputs to control wasted spark or coil on plug systems
24 channel internal datalogger (FuelTech USB-CAN Converter needed – sold separately)
Idle speed control by timing,step motor or by solenoid
Plug and Play connection to Racepak IQ3 dash *
Fuel table tuning aid **
Closed loop lambda control **
Active traction control (FuelTech GearController needed – sold separately)
* Using integrated CAN port
**FuelTech WB-O2 Meter Nano or WB-O2 Datalogger needed – sold separately

Product intended for off road race-only, ground vehicle use only. FuelTech is not responsible for any misuse of these products. Check with your local authorities regarding highway laws in your area.



TECHNICAL DESCRIPTION
Rotary and piston engine compatible (2-3 rotors, 1 to 12cyl)
Ignition and fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager)*
13 input channels (IAT, ECT, oil and fuel pressure, O2 sensor, TPS, electronic pedal – 2 channels, electronic throttle, A/C, two-step, RPM and cam sensor)
2 injectors output that control up to 12 high impedance injectors
7 auxiliary outputs (fuel pump, fan, variable camshaft, A/C, etc.)
Built-in MAP Sensor (87 psi)
5 internal memory files
Boost control by RPM through N75 valve
Progressive nitrous injection (wet/dry)
Screen bright and buzzer Volume control
Password protection
Map backups on PC*
Firmware update over the internet*
Engine protection through 10 configurable alerts
Time based rev limiter
ECU Language according to your purchase region (no future language change is possible)
Dimensions: 140mm x 80mm x 30mm
*FuelTech USB-CAN Converter needed – sold separately

CONTENTS OF PACKAGING
1 FT400 EFI System
1 Operation and installation guide
1 10ft FT400 unterminated main harness (optional)
1 10ft FT400 unterminated auxiliary harness (optional)
1 Nylon hose for MAP Sensor
1 Smart Clip Bracket & Hardware
1 promotional kit (including a pen, a keychain and a sticker kit)

Related Products