JMS PowerMAX V2 Pedal Position Activate Voltage Booster for General Motors LT-Powered Cars/Trucks

Regular price $450.00

Activated via Throttle Position Sensor • GM Version 

Increase the output of ANY fuel pump by up to 85%!!

Why replace your fuel pump when you can reliably increase it’s output with PowerMAX?

Use PowerMAX v2 to quickly and easily increase your stock fuel pumps output!

PowerMAX Version 2 upgrades include: New Case, Higher Output & More Features!!

Typically used on GM/DCX vehicles with constant power applied to the fuel pump driver module.

On your GM support over 800hp with the stock pump! 

Simple installation: PowerMAX splices into your existing fuel pump +12V DC feed wire. Compatible with all 12V or 16V battery systems
This version is designed specifically for your 2010+ GM & DCX vehicle: (Camaro, Corvette, Challenger)
Eliminate fuel pressure spikes!! Green Status LED: Know at a glance what the unit is doing. Blinking LED = Boosting Voltage
Quickly and easily adjust the manifold boost pressure to enable voltage boosting. Enable Voltage Boosting with via internal boost pressure sensor (1-29psi).
Each PowerMAX v2 Kit Contains: 44 Amp PowerMAX V2 Voltage Booster, Installation Kit, Set of Instructions

Installation Kit Contains: 1 – Vacuum Line Reducer 3/16″ to 1/8″, 1 – Vacuum Tee 1/8″ x 3/16 x 3/16, 1 – Vacuum Tee 3/16″ x 3/16″ x 3/16″, 1 – Vacuum Tee 1/4″ x 1/4″ x 3/16″, 1 – Vacuum Tee 3/8″ x 3/8″ x 3/16″, 10 feet of 7/64″ vacuum hose, 20 feet of 1/8″ hard plastic vacuum line, 1 foot of 5/32″ vacuum hose, 1 – 30amp mini-fuse, solder, 2 – 10/12gauge Heat Shrink Butt Splices, 1 – 10 gauge Heat Shrink Ring Terminal, 6 – Large Zip Ties, 6 – Small Zip Ties, 6 – Self drilling hex screws, 1- mini screw-driver